SEISMIC RESILIENCE OF CFRP CONFINED RC COLUMNS: EXPERIMENTAL ANALYSIS

Authors

  • Nur Hajarul Falahi Abdul Halim Faculty of Built Environment and Survey, UNIVERSITI TEKNOLOGI MALAYSIA
  • Fara Diva Mustapa Faculty of Built Environment and Survey, UNIVERSITI TEKNOLOGI MALAYSIA
  • Mohamad Zahierrudien Ismail Faculty of Built Environment and Survey, UNIVERSITI TEKNOLOGI MALAYSIA

DOI:

https://doi.org/10.21837/pm.v22i32.1502

Keywords:

Seismic, strengthening, FRP

Abstract

Resilience and sustainability are the key goals of any building and infrastructure, especially in countries with moderate to high seismicity. However, in countries with low seismicity like Malaysia most existing buildings are designed to carry only the gravity load, which is vulnerable when subjected to additional loads such as earthquakes. Lateral ground motion can severely damage vital components like columns in the form of concrete crushing associated with the buckling of longitudinal reinforcement. This paper presented the application of fibre-reinforced polymer (FRP) as reinforcement in RC columns based on experiments for resilience and sustainability of RC structure. The application of FRP for retrofitting and strengthening structural elements not only increased the axial, shear and bending capacity, but also high durability towards harsh environment. CFRP in sheets/strips were flexible as compared to FRP bars; therefore, they can easily be shaped into spirals to confine the core concrete of column. This study showed that by using FRP sheets as internal confinement improved the seismic response of RC columns better than the conventional carbon steel material. A discussion on the performance of FRP sheets as internal confinement and their potential in improving the resilience and robustness of RC structures was presented for future directions.

Downloads

Download data is not yet available.

References

Ahmed, N. (2017). Housing Reconstruction in A Conflict Zone –Lessons Learned from Awaran, District in Balochistan, Pakistan. Journal of the Malaysian Institute of Planners, 15(3), 39–50. DOI: https://doi.org/10.21837/pmjournal.v15.i3.296

Alih, S. C., & Vafaei, M. (2019). Performance of reinforced concrete buildings and wooden structures during the 2015 Mw 6.0 Sabah earthquake in Malaysia. Engineering Failure Analysis, 102, 351–368. https://doi.org/10.1016/j.engfailanal.2019.04.056 DOI: https://doi.org/10.1016/j.engfailanal.2019.04.056

Alih, S., & Khelil, A. (2012). Behavior of inoxydable steel and their performance as reinforcement bars in concrete beam: Experimental and nonlinear finite element analysis. Construction and Building Materials, 37, 481–492. https://doi.org/10.1016/j.conbuildmat.2012.07.038 DOI: https://doi.org/10.1016/j.conbuildmat.2012.07.038

Capacci, L., Biondini, F., & Frangopol, D. M. (2022). Resilience of aging structures and infrastructure systems with emphasis on seismic resilience of bridges and road networks: Review. Resilient Cities and Structures, 1(2), 23–41. https://doi.org/10.1016/j.rcns.2022.05.001 DOI: https://doi.org/10.1016/j.rcns.2022.05.001

Chandra Dutta, S., Halder, L., & Prasad Sharma, R. (2021). Seismic vulnerability assessment of low to mid-rise RC buildings addressing prevailing design and construction practices in the Northeastern region of the Indian subcontinent: A case study-based approach. Structures, 33, 1561–1577. https://doi.org/10.1016/j.istruc.2021.05.032 DOI: https://doi.org/10.1016/j.istruc.2021.05.032

Chen, D., Guo, W., Kang, J., & Shi, J. (2023). Experimental and modelling investigation on chloride transport and flexural behaviour of RC beams subjected to simultaneous deteriorating factors of carbonation, FT cycles and multi-type sustained stress. Construction and Building Materials, 397, 132305. https://doi.org/10.1016/j.conbuildmat.2023.132305 DOI: https://doi.org/10.1016/j.conbuildmat.2023.132305

Chen, Y., Zhou, F., Zheng, S., Li, J., Shang, C., & Lin, X. (2023). Influence of cyclic hardening characteristic on seismic performance of welded austenitic stainless-steel H-section beam-column. Engineering Structures, 288. https://doi.org/10.1016/j.engstruct.2023.116210 DOI: https://doi.org/10.1016/j.engstruct.2023.116210

Deng, J., Li, X., Wang, Y., Xie, Y., & Huang, C. (2021). RC beams strengthened by prestressed CFRP plate subjected to sustained loading and continuous wetting condition: Flexural behaviour. Construction and Building Materials, 311. https://doi.org/10.1016/j.conbuildmat.2021.125290 DOI: https://doi.org/10.1016/j.conbuildmat.2021.125290

El Gamal, S., & Alshareedah, O. (2020). Experimental Study on the Performance of Circular Concrete Columns Reinforced with GFRP under Axial Load. 877–885. https://doi.org/10.29117/cic.2020.0115 DOI: https://doi.org/10.29117/cic.2020.0115

Guo, Y. C., Gao, W. Y., Zeng, J. J., Duan, Z. J., Ni, X. Y., & Peng, K. Di. (2019). Compressive behavior of FRP ring-confined concrete in circular columns: Effects of specimen size and a new design-oriented stress-strain model. Construction and Building Materials, 201, 350–368. https://doi.org/10.1016/j.conbuildmat.2018.12.183 DOI: https://doi.org/10.1016/j.conbuildmat.2018.12.183

Ibrahim, A. I., Wu, G., & Sun, Z.-Y. (2017). Experimental Study of Cyclic Behavior of Concrete Bridge Columns Reinforced by Steel Basalt-Fiber Composite Bars and Hybrid Stirrups. Journal of Composites for Construction, 21(2). https://doi.org/10.1061/(ASCE)CC.1943-5614.0000742 DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000742

Iliani Rosli, M., Alih, S. C., & Vafaei, M. (2022). Influence of the Malaysia’s National Annex for Seismic Design on the Size and Reinforcement Weight of Low-rise Buildings. IOP Conference Series: Earth and Environmental Science, 1022(1). https://doi.org/10.1088/1755-1315/1022/1/012042 DOI: https://doi.org/10.1088/1755-1315/1022/1/012042

Jia, S., & Zhan, D. J. (2023). Resilience and sustainability assessment of individual buildings under hazards: A review. In Structures (Vol. 53, pp. 924–936). Elsevier Ltd. https://doi.org/10.1016/j.istruc.2023.04.095 DOI: https://doi.org/10.1016/j.istruc.2023.04.095

Jing, D. H., Yu, T., & Liu, X. D. (2016). New configuration of transverse reinforcement for improved seismic resistance of rectangular RC columns: Concept and axial compressive behavior. Engineering Structures, 111, 383–393. https://doi.org/10.1016/j.engstruct.2015.12.014 DOI: https://doi.org/10.1016/j.engstruct.2015.12.014

Johar’, F., Rafee Majid, M., Razak Jaffar, A., Adi, &, & Yahya, S. (2013). SEISMIC MICROZONATION FOR BANDA ACEH CITY PLANNING. DOI: https://doi.org/10.21837/pm.v11i2.120

Kharal, Z., & Sheikh, S. A. (2020). Seismic Behavior of Square and Circular Concrete Columns with GFRP Reinforcement. Journal of Composites for Construction, 24(1). https://doi.org/10.1061/(ASCE)CC.1943-5614.0000988 DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000988

Liang, S., Shen, Y., & Ren, X. (2022). Comparative study of influential factors for punching shear resistance/failure of RC slab-column joints using machine-learning models. Structures, 45, 1333–1349. https://doi.org/10.1016/j.istruc.2022.09.110 DOI: https://doi.org/10.1016/j.istruc.2022.09.110

Looi, D. T. W., Lam, N., & Tsang, H.-H. (2021). Developing Earthquake-Resistant Structural Design Standard for Malaysia Based on Eurocode 8: Challenges and Recommendations. Standards, 1(2), 134–153. https://doi.org/10.3390/standards1020012 DOI: https://doi.org/10.3390/standards1020012

Mei, S. J., Bai, Y. L., Dai, J. G., & Han, Q. (2023). Seismic behaviour of shear critical square RC columns strengthened by large rupture strain FRP. Engineering Structures, 280. https://doi.org/10.1016/j.engstruct.2023.115679 DOI: https://doi.org/10.1016/j.engstruct.2023.115679

Nugroho, L. Z., & Chiu, C. K. (2023). Damage-Controlling Seismic Design of Low- and Mid-Rise RC Buildings Considering Mainshock-Aftershock Sequences. Structures, 57. https://doi.org/10.1016/j.istruc.2023.105099 DOI: https://doi.org/10.1016/j.istruc.2023.105099

Pan, T., Zheng, Y., Zhou, Y., Liu, Y., Yu, K., & Zhou, Y. (2022). Coupled effects of corrosion damage and sustained loading on the flexural behavior of RC beams strengthened with CFRP anchorage system. Composite Structures, 289. https://doi.org/10.1016/j.compstruct.2022.115416 DOI: https://doi.org/10.1016/j.compstruct.2022.115416

Prajapati, G. N., Farghaly, A. S., & Benmokrane, B. (2022). Performance of concrete columns longitudinally reinforced with steel and GFRP bars and confined with GFRP spirals and cross ties under reversed cyclic loading. Engineering Structures, 270. https://doi.org/10.1016/j.engstruct.2022.114863 DOI: https://doi.org/10.1016/j.engstruct.2022.114863

Rabi, M., Cashell, K. A., & Shamass, R. (2019). Flexural analysis and design of stainless steel reinforced concrete beams. Engineering Structures, 198. https://doi.org/10.1016/j.engstruct.2019.109432 DOI: https://doi.org/10.1016/j.engstruct.2019.109432

Saatcioglu, M., & Razvi, S. R. (1992). Strength and ductility of confined concrete. J. Struct. Eng., 118(6), 1590–1607. DOI: https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1590)

Sharma, K., Deng, L., & Noguez, C. C. (2016). Field investigation on the performance of building structures during the April 25, 2015, Gorkha earthquake in Nepal. In Engineering Structures (Vol. 121, pp. 61–74). Elsevier Ltd. https://doi.org/10.1016/j.engstruct.2016.04.043 DOI: https://doi.org/10.1016/j.engstruct.2016.04.043

Tang, H., Chen, J., Fan, L., Sun, X., & Peng, C. (2020). Experimental investigation of FRP-confined concrete-filled stainless steel tube stub columns under axial compression. Thin-Walled Structures, 146. https://doi.org/10.1016/j.tws.2019.106483 DOI: https://doi.org/10.1016/j.tws.2019.106483

Ting, D., Looi, W., Lam, N., Looi, D. T. W., Tsang, H. H., & Lam, N. T. K. (2019). The Malaysian Seismic Design Code: Lessons learnt. https://www.researchgate.net/publication/333078631

Vahed, Y. K. (2017). Seismic Retrofit of Low-ductile Columns Through Concrete Jacketing With Inoxydable Reinforcement.

Xu, C. Y., Han, L. H., & Hou, C. (2023). Behaviour of recycled aggregate concrete-filled stainless steel tubular columns subjected to lateral monotonic and cyclic loading. Engineering Structures, 293. https://doi.org/10.1016/j.engstruct.2023.116663 DOI: https://doi.org/10.1016/j.engstruct.2023.116663

Yang, H., Sun, P., & Deng, Y. (2020). Experiment investigation of the influence of reinforcing bar buckling on seismic behavior of RC columns. Engineering Structures, 220. https://doi.org/10.1016/j.engstruct.2020.110923 DOI: https://doi.org/10.1016/j.engstruct.2020.110923

Yang, K. H., Mun, J. H., & Hwang, S. H. (2022). Effect of concrete type on equivalent lateral confinement pressure in columns under axial loads. Journal of Building Engineering, 47. https://doi.org/10.1016/j.jobe.2021.103864 DOI: https://doi.org/10.1016/j.jobe.2021.103864

Zeng, J. J., Ye, Y. Y., Liu, W. Te, Zhuge, Y., Liu, Y., & Yue, Q. R. (2023). Behaviour of FRP spiral-confined concrete and contribution of FRP longitudinal bars in FRP-RC columns under axial compression. Engineering Structures, 281. https://doi.org/10.1016/j.engstruct.2023.115747 DOI: https://doi.org/10.1016/j.engstruct.2023.115747

Zhang, Q., Zheng, N. H., Gu, X. L., Wei, Z. Y., & Zhang, Z. (2022). Study of the confinement performance and stress-strain response of RC columns with corroded stirrups. Engineering Structures, 266. https://doi.org/10.1016/j.engstruct.2022.114476 DOI: https://doi.org/10.1016/j.engstruct.2022.114476

Zhao, P., Xu, G., Wang, Q., Zhao, J., & Liu, X. (2018). Influence of stirrup arrangements on the corrosion characteristics of reinforced concrete members. Construction and Building Materials, 192, 683–695. https://doi.org/10.1016/j.conbuildmat.2018.10.144 DOI: https://doi.org/10.1016/j.conbuildmat.2018.10.144

Downloads

Published

2024-07-29

How to Cite

Abdul Halim, N. H. F., Mustapa, F. D., & Ismail, M. Z. (2024). SEISMIC RESILIENCE OF CFRP CONFINED RC COLUMNS: EXPERIMENTAL ANALYSIS. PLANNING MALAYSIA, 22(32). https://doi.org/10.21837/pm.v22i32.1502

Most read articles by the same author(s)